SGS1+ with Premium FSE nearly OK

Discussions about running the rSAP app on the Samsung Galaxy S
Post Reply
Posts: 1
Joined: Wed Jan 30, 2013 11:53 am

SGS1+ with Premium FSE nearly OK

Post by Radiomann » Wed Jan 30, 2013 12:02 pm

Hi folks!
I have connected my SGS1+ to FSE premium, but on every new connection, I have to confirm the 16 bin code, which is already stored in the phone. I just have to press the button "Annehmen". But normally, there is a little green hook to set, so the phone stores this access for further connections. But in my case, this hook is "grey" and I cannot activated it. What's wrong?
Some further info: I have got my phone from ebay and the first connection to rSAP was OK, including the green hook. But than I have done some rubbish and have to reset the phone. After this, I have got this problem with the grey hook.
Thanks for any hint ...

Site Admin
Posts: 4139
Joined: Wed Mar 23, 2011 4:12 pm

Re: SGS1+ with Premium FSE nearly OK

Post by admin » Wed Jan 30, 2013 8:08 pm

You should try to delete the phone in the car and delete the car in the phone's Bluetooth settings and start a fresh pairing. As far as I know this happens when phone and car didn't store the same key, i.e. something went wrong with pairing.

Post Reply

Return to “Samsung Galaxy S I9000”