SGS2 official ICS 4.0.3 Update does NOT support rSAP anymore

Discussions about running the rSAP app on the Samsung Galaxy S II
Honzze
Posts: 16
Joined: Wed Mar 14, 2012 9:21 am

SGS2 official ICS 4.0.3 Update does NOT support rSAP anymore

Post by Honzze » Wed Mar 14, 2012 9:30 am

Hello,
as some of you already feared, there is no more Support for rSAP on the SGS2 with the official ICS update. PbAP already was a terrible mess on 2.3.x ROMs. Since I did not want to use a AOSP based Rom to avoid Problems with my already bought Apps, I've been waiting for what would happen with ICS. But now I am really disappointed and angry because of this.

The 1-Billion Dollar question is now: if Samsung does not integrate rSAP anymore, will your App work now with rooted stock roms also?

ayasystems
Posts: 12
Joined: Mon May 23, 2011 10:04 pm

Re: SGS2 official ICS 4.0.3 Update does NOT support rSAP any

Post by ayasystems » Wed Mar 14, 2012 10:47 am

I've tested rsap app testerday and it didn't work.

SGS2 rooted wirth ICS 4.0.3

Honzze
Posts: 16
Joined: Wed Mar 14, 2012 9:21 am

Re: SGS2 official ICS 4.0.3 Update does NOT support rSAP any

Post by Honzze » Wed Mar 14, 2012 11:03 am

Oh no, what a mess. I have waited for ICS, because some of the XDA-Devs told me, that PbAP Support would be much better than before. Maybe it is better, but without working rSAP, the phone is nearly useless for me, and for everybody in my company. We all have VAG Cars.

admin
Site Admin
Posts: 4133
Joined: Wed Mar 23, 2011 4:12 pm

Re: SGS2 official ICS 4.0.3 Update does NOT support rSAP any

Post by admin » Wed Mar 14, 2012 11:30 am

Can't believe it... I looked at the XXLPQ Darky ROM files and the rSAP functions are still in the libsec-ril.so. But they exist in the Galaxy Ace version, too :?

Can someone please send me a radio and main log? Either with aLogcat for stock rSAP or with the log option of my app.

ayasystems
Posts: 12
Joined: Mon May 23, 2011 10:04 pm

Re: SGS2 official ICS 4.0.3 Update does NOT support rSAP any

Post by ayasystems » Wed Mar 14, 2012 11:41 am

admin wrote:Can't believe it... I looked at the XXLPQ Darky ROM files and the rSAP functions are still in the libsec-ril.so. But they exist in the Galaxy Ace version, too :?

Can someone please send me a radio and main log? Either with aLogcat for stock rSAP or with the log option of my app.
When install rSAP app i lost phone use. I've need wipe all to restore telephone utility.

admin
Site Admin
Posts: 4133
Joined: Wed Mar 23, 2011 4:12 pm

Re: SGS2 official ICS 4.0.3 Update does NOT support rSAP any

Post by admin » Wed Mar 14, 2012 12:15 pm

I just bought a SGS2 to investigate that. Keep your fingers crossed...

Honzze
Posts: 16
Joined: Wed Mar 14, 2012 9:21 am

Re: SGS2 official ICS 4.0.3 Update does NOT support rSAP any

Post by Honzze » Wed Mar 14, 2012 1:15 pm

Well I cross my fingers. To be clear: I'd immediately buy your app if it gives me the possibility to use rSAP and PbAP again. It's not about the money. I paid more for my phone just to get rSAP.
I'm pretty sure that CM9 would fit my needs, but I'd like to wait for a stable release (if any).

It would be even better for Samsung to erase rSAP from libsec-ril.so stock ROMs, then I could use something that works, instead of consistently hoping for improvements by Samsung which turn out to be deteriorations! Sad that one can't change libsec-ril.so on it's own to get your app working on stock rooted ROM's...

Thanks for your interest in this matter!

rSAP-user
Posts: 2
Joined: Thu Mar 15, 2012 12:28 pm

Re: SGS2 official ICS 4.0.3 Update does NOT support rSAP any

Post by rSAP-user » Thu Mar 15, 2012 12:41 pm

Does all this functions are present in the Samsung libsec-ril.so ?

OemInitSAP
RxSAP_CardReader_Status
RxSAP_Connect
RxSAP_SimPower
RxSAP_Status
RxSAP_TransferAPDU
RxSAP_TransferATR
RxSAP_Transport_Protocol
SAP_onRequestComplete
TxSAP_Connect
TxSAP_GetStatus
TxSAP_Set_TransportProtocol
TxSAP_SimPower
TxSAP_TransferAPDU
TxSAP_TransferAtr
TxSAP_TransferReaderStatus
requestSapConnect
requestSapReaderStatus
requestSapSetProtocol
requestSapSimPower
requestSapStatus
requestSapTransferAPDU
requestSapTransferATR

It is easy to see them with any ARM disassembler

thommygay24
Posts: 10
Joined: Mon May 16, 2011 6:15 pm

Re: SGS2 official ICS 4.0.3 Update does NOT support rSAP any

Post by thommygay24 » Thu Mar 15, 2012 9:16 pm

I am disappointed that Samsung has ended the rsap support.
I am using I9100XXLPQ and have no problems using the android-rsap.com with my VW Golf with FSE Premium

Honzze
Posts: 16
Joined: Wed Mar 14, 2012 9:21 am

Re: SGS2 official ICS 4.0.3 Update does NOT support rSAP any

Post by Honzze » Fri Mar 16, 2012 10:53 am

thommygay24 wrote:I am disappointed that Samsung has ended the rsap support.
I am using I9100XXLPQ and have no problems using the android-rsap.com with my VW Golf with FSE Premium
Really? Well, that would be great!

We are still waiting for a statement from the developer himself… Hopefully he didn't get a "I9100G", since it seems that Samsung does not sell the other version anymore. And I don't know if the "G" Version already has a ICS version to try!

Post Reply

Return to “Samsung Galaxy S II I9100”