S3 Android 4.1.2: native RSAP?

Discussions about running the rSAP app on the Samsung Galaxy S III
admin
Site Admin
Posts: 4128
Joined: Wed Mar 23, 2011 4:12 pm

Re: S3 Android 4.1.2: native RSAP?

Post by admin » Sat May 04, 2013 2:52 pm

Interesting. It looks like Samsung will add rSAP to more phones than just the Galaxy S and Note series.

Back to your original question: perhaps you have a problem with phonebook transfer? Try to redo the Bluetooth pairing, and this time don't allow phonebook access on the mobile. If the connection is now stable the Bluetooth conection is interrupted because of phonebook problems. But if you already have all contacts in the car, this is not very likely.

Maybe it is a power save issue. Try to keep the screen on.

Last posibility I can think of is a problem with the SIM card, although this is not likely after several minutes.

pavelk
Posts: 8
Joined: Fri May 03, 2013 9:44 am

Re: S3 Android 4.1.2: native RSAP?

Post by pavelk » Fri May 10, 2013 7:57 am

ok, I will try that power save and will see. Thanks a lot in the meantime.

pavelk
Posts: 8
Joined: Fri May 03, 2013 9:44 am

Re: S3 Android 4.1.2: native RSAP?

Post by pavelk » Mon May 13, 2013 8:40 am

ok, so I have tested connection with unlocked phone and really it looks like power save issue, no it works just fine. So I had to by power charger to my car for this mobile:-)

admin
Site Admin
Posts: 4128
Joined: Wed Mar 23, 2011 4:12 pm

Re: S3 Android 4.1.2: native RSAP?

Post by admin » Mon May 13, 2013 11:23 am

Either charge the phone while in the car, or the "Bluetooth Keepalive" app also seems to help.

pavelk
Posts: 8
Joined: Fri May 03, 2013 9:44 am

Re: S3 Android 4.1.2: native RSAP?

Post by pavelk » Mon May 13, 2013 8:16 pm

ok, I have installed this application and my problem is finally solved! Thank you very much for your help.

panasonicman
Posts: 1
Joined: Sat Jun 08, 2013 9:38 pm

Re: S3 Android 4.1.2: native RSAP?

Post by panasonicman » Sat Jun 08, 2013 9:42 pm

Right im asking a very direct question and would welcome a yes or no answer as the subject is so confusing.
Will a new Samsung galaxy s3 pair correctly out of the box with a 2009 vw scirocco with built in premium bluetooth

mirda646
Posts: 3
Joined: Sat Jun 08, 2013 10:01 pm

Re: S3 Android 4.1.2: native RSAP?

Post by mirda646 » Sat Jun 08, 2013 10:12 pm

admin wrote:Samsung Fame (GT-S6810P?) supports rSAP out of the box or with my rSAP app? Do you have my phonebook app installed? Really Android 4.2, not 4.1?

Mám Samsung Fame s Android 4.1.2., telefon byl nalezen, po spárování však bylo hlášení "Vložte SIM kartu do telefonu" a po chvíli se odpojil. Auto Superb 2,s Premium III. Kde je chyba?

I have a Samsung Fame with Android 4.1.2., The phone was found, after pairing, however, was the message "Insert SIM card into the phone," and after a while disconnected. Superb Auto 2 with Premium III. What is wrong?

admin
Site Admin
Posts: 4128
Joined: Wed Mar 23, 2011 4:12 pm

Re: S3 Android 4.1.2: native RSAP?

Post by admin » Sat Jun 08, 2013 10:45 pm

This happens with Samsung rSAP or with my app? Do you have a second SIM card to test with?

admin
Site Admin
Posts: 4128
Joined: Wed Mar 23, 2011 4:12 pm

Re: S3 Android 4.1.2: native RSAP?

Post by admin » Sat Jun 08, 2013 10:46 pm

panasonicman wrote:Right im asking a very direct question and would welcome a yes or no answer as the subject is so confusing.
Will a new Samsung galaxy s3 pair correctly out of the box with a 2009 vw scirocco with built in premium bluetooth
Yes

mirda646
Posts: 3
Joined: Sat Jun 08, 2013 10:01 pm

Re: S3 Android 4.1.2: native RSAP?

Post by mirda646 » Sat Jun 08, 2013 11:30 pm

admin wrote:This happens with Samsung rSAP or with my app? Do you have a second SIM card to test with?
It happens with rSAP Samsung. Yes I have another SIM card from the same operator - T-Mobile CZ. Should I try it? I do not know why, old phone (Nokia) SIM to work.

Post Reply

Return to “Samsung Galaxy S III I9300”