Fix for QMI_ERR_ACCESS_DENIED

[admin]

As far as I know the Z5 compact is a 64 bit phone. So far I could not enable rSAP on a 64 bit phone, but you may try.

[magna413]

Do you have updated the translation portion of the translate site?

I see the qualcom....info is not translated in installer app.

[admin]

I updated it yesterday.

[admin]

I uploaded an update (2.5.9) for the installer app to Play Store.
See also http://www.android-rsap.com/38-aktuelle ... pdate.html

[madnut]

Xiaomi Mi4-c, Snapdragon 808.
Installed latest version and was able to allow rsap via test mode. But now can't return back to normal mode. How can I disable test mode now?
Sim Check now:

Screenshot_2016-02-28-16-27-57_com.android_rsap.BluetoothRSAP.png (154.18 KiB) Viewed 45267 times

[admin]

Does the installer app still show "test mode active"?

The SIM test looks strange, but the final test is if it works with the car.

[madnut]

Yes, it still shows "test mode active" and phone can't see SIM cards, so I'm not able to make calls now and don't know how to disable test mode.

[madnut]

Could you also explain what actions are perfromed if click on "Allow rSap.." button? And how you switch to the test mode, are there any commands I can run to switch back?

[admin]

Are the SIM cards missing after SIM check? I also had this on the ZTE Nubia Z9 mini. A reboot fixed it.

Maybe the rSAP system files are causing problems? Try uninstalling them.

A more detailed description about what the installer app does is here: http://www.android-rsap.com/41-support/ ... ccess.html. The "Test mode" is the NV item 453. You can change it with the Qualcomm QCDM tool.

[madnut]

Are the SIM cards missing after SIM check?

No, they missed after installer rebooted phone in test mode. Neither reboot nor power off didn't help - still "test mode active"

Maybe the rSAP system files are causing problems? Try uninstalling them.

Didn't help either.

The "Test mode" is the NV item 453. You can change it with the Qualcomm QCDM tool.

Did you mean QXDM? I've installed it, but don't know, what value do I need to place for ftm_mode? 0x0?

Also I've noticed that sap_security_restrictions file appeared in EFS Explorer as "File", not "Item File" as you described in instruction.

36.png (22.21 KiB) Viewed 45249 times